PART 2: PAST PROJECTS
Plumbing and HVAC design for 175,000 sq. ft. research building. Built-up air handlers with heat
reclaim system. Variable air volume system with integration to lab fume hoods. Five floors finished
out and three floors shelled for future.
Analyzed and redesigned pumping and piping in central chiller plant converting existing header system to primary/secondary piping/pumping system with variable speed pumps for 15,000 tons.
Design upgrade of piping and pumping for existing central chiller/boiler plant. New 1,000 ton chiller, cooling tower, primary/secondary variable speed pumps and new central plant energy management/control system.
New boiler, cooling tower, and related piping to upgrade central boiler/chiller plant.
Analyzed and redesigned pumping and piping in central chiller/boiler plant. New design with 3,080 tons of new chillers, cooling towers, D.D.C. controls, deaerators, steam piping, primary/secondary piping and variable speed pumping.
Designed and phased new medical gas system for existing operational Medical Center. System included piping outlets, zone valves, alarms, air compressors, vacuum pumps for O2, VAC, and air in rooms.
Designed and phased replacement of all sanitary sewer piping for existing operational medical facility.
HVAC design to upgrade system with new chillers, air handling units, fan coil units and energy management system for 120 bed nursing home.
Design mechanical systems for new 120 bed nursing homes. Design included plumbing, medical gas, boilers, pumps, chillers, fan coil units, air handling units and energy management systems.
Design plumbing, HVAC and outside utilities for new 360 room dormitory.
Design plumbing, HVAC and outside utilities.
HVAC design for P.E. Building. HVAC system consists of chillers, boilers,
air handling units for the gym and exercise rooms. Dehumidification units for
swimming pool area.
Designed boiler and chiller plant with underground heating and cooling loop for 5 buildings. Chiller plant designed with free cooling feature.
Designed mechanical system for sports complex with 6 basketball courts, elevated walking track, large weight/exercise room, 2 aerobics rooms, climbing wall, 6 handball/racketball courts, office spaces and indoor swimming pool.
Design HVAC renovations to five story science lab and design campus wide energy management system for all buildings. Lab renovations included HVAC interface with lab hoods for VAV system.
Developed south chilled water loop connecting eight buildings to the central chiller system.
South chilled water loop expansion. Expanded chiller plant and extended loop to connect to seven additional buildings.
North chilled water loop connecting ten buildings to central chiller plant.
Design new north central chiller plant with three 1,000 ton chillers, cooling towers, pumps, central plant energy management system.
Energy analysis and cost estimates for furnishing and delivering steam, hot water and chilled water to each building on the Campus. Five different types of campus wide systems studied. Recommended converting existing steam plant into central chiller/boiler plant with chilled/hot water loop to supply campus buildings. Total of 9,000 tons and 3,000 boiler horsepower. Project to be done in five phases.
Design new steam, heating water and chilled water distribution system and central chilled/heating water plant for central core of 25 buildings on the campus. Central plant consists of steam to hot water converters, 1,250 ton chiller, pumps, cooling tower, etc.
Design for extension of central campus heating water and chilled water loop. Connections to five buildings.
Design new chiller plant and chilled water distribution loop to supply cooling water to existing and new buildings on campus, two (2) 1,250 ton chillers, pumps, and cooling towers. This phase included air conditioning for six dorms using new chilled water loop. There are four phases to this project.
Design mechanical system for teaching/research building. Special considerations for research labs pressurization, fume hood exhaust, and special Vivarium HVAC systems connected to central chilled water loop.
Design new HVAC, plumbing, and electrical systems for existing kitchen and cafeteria. New HVAC system connected to central chilled water loop.
Design new HVAC, hood exhaust and plumbing systems for existing Science Lab Building. New HVAC system connected to central chilled water loop.
Design new HVAC and plumbing system for Student Union and Grille. New HVAC system connected to central chilled water loop.
HVAC and plumbing design for renovation and addition to existing church. New chiller, boiler, pumps, air handling units, and duct.
Design of HVAC and plumbing systems for renovations and additions of two story county office and courts building. Chilled and hot water, variable air volume system with energy management system.
Design of HVAC and plumbing systems for new two story county office and courts building. Chilled and hot water, fan coil system with energy management system.
Design of HVAC and plumbing systems for renovations and additions of three story county office and courts building. Chilled and hot water, fan coil systems with energy management system.
Design of HVAC and plumbing systems for 120,000 sq. ft. casino and 500 room hotel.
Designed mechanical systems for casino addition and additional 300 rooms to hotel. Chiller plant was designed to supply cooling to fan coil units in rooms, air handling units in casino and to make-up air units.
Design of HVAC and plumbing systems for 100,000 square foot casino.
Design of HVAC and plumbing systems for 80,000 square foot casino and 400 room hotel
Designed mechanical system for 500 room hotel, kitchen, restaurant and gaming floor.
Design of HVAC and plumbing systems for 60,000 square foot casino.
Design of new heating and air conditioning systems for existing school, cafeteria, kitchen, and auditorium. Design included energy management system and interface with central computer system.
Designed HVAC and plumbing systems for new school consisting of classrooms, offices, library, kitchen, gym and band room. Central energy management system for this complex and two future campuses.
Design of HVAC and plumbing systems for renovation and additions to high school. Project includes new library, classrooms, administration area and new auditorium. Interface with existing energy management system.
Designed HVAC and plumbing systems for new school consisting of classrooms, offices, library, kitchen, gym and band room. Central energy management system for this complex.
Energy management system and air handling unit modifications.
Analyzed and redesigned chiller plant with primary/secondary variable speed pumping and piping. Three 600 ton chillers, cooling tower, pumps and central plant energy management and controls. Designed FREE COOLING cycle using cooling towers.
Analysis and design of chilled water (120 ton) and process water for new precision molding module. After analysis of the existing HVAC system, an additional 75 tons of air conditioning was designed for space cooling of this module.
Analysis and design on new chilled and process water, compressed air system and space air conditioning for second precision molding module.
Analysis and design of gas distribution system for manufacturing facility of 800,000 sq. ft. Network of over 6,000 feet of pipe and valves for high pressure distribution to future equipment.
Analysis and design of gas distribution system for manufacturing facility of 750,000 sq. ft. Network of over 4,800 feet of pipe and valves for high pressure distribution to future equipment.
Design of 3,000 boiler horsepower plant to serve poultry rendering and process plant. Steam system operating at 125 psi with high pressure condensate return.
Design of HVAC, plumbing, make-up air and exhaust of paint and welding booths, and hazardous waste piping systems for 125,000 square foot manufacturing plant.
Analysis and design of new HVAC system for existing 90,000 square foot plant.
Design of make-up air, heating and exhaust system for 36,000 square feet. Design of make-up air and exhaust for 600 square foot battery charging area.
Designed HVAC systems, compressed air and vacuum systems, high pressure wash down system, and sewer systems for new catfish processing plant.
Analysis and redesign of existing chiller plant (1,750 tons), pumps (primary and secondary), cooling tower (by-pass), and piping. Heat gain/loss calculations on 105,000 sq. ft. manufacturing facility with new duct lay-outs, air handlers, and chilled pipe water system.
If you would like to learn more about our services download our qualifications brochure.
To contact us by email click here.